So, last week I wrote about my memories of my introduction to LEGO Technic, which was way back in 1978. Over the recent Easter weekend, I had the chance to visit my childhood LEGO collection. I found some Technical set instructions in the mix: 8860-Car Chassis, and 856Bulldozer. But not for my original helicopter. Then I found the sheet you see here: preserved after 40 years. Not the instructions for the Helicopter, but for the B-Model airplane. I turned them over, and on the flip side were blueprints for the helicopter, at a 1:1 scale.
Now, we ended up owning a fairly broad collection of LEGO for the 70’s-80’s: lots of regular bricks, ancient wheels and parts from 3 significant technical sets (as well as some supplementary sets). I thought to myself: there is a high probability of locating enough parts to put the helicopter together. Perhaps not colour perfect, but structurally so.
The LEGOLAND Discovery Centre in Melbourne was officially opened this week, after a weekend of previews, and a soft launch of the shop last week. My other job meant that The Rambling Brick was unfortunately unable to attend today’s grand opening, however I do hope to get there in the near future, and provide an insight into the centre from an AFOL’s point of view
However, I got to the shop last week and was duly impressed by the range, as well as the emotional roller coaster that was the Pick a Brick Wall.
I would like to highlight the description of the Discovery Centre…
the Ultimate Indoor LEGO Playground!
It is a children’s play centre. There will be evenings for Adult Fans to gather and enjoy the Centre, but during regular hours adults must attend with children (and won’t be admitted without them…).
Early reports from preview openings confirm that the venue is well suited to children who enjoy their LEGO, but parents who are not so engaged may wonder what all the fuss is about. I am personally looking forward to seeing the completed Miniland display, with many of Melbourne’s icons made of LEGO. It was partially completed when I had the opportunity to visit earlier in the year, and shaping up to be fantastic.
In the meantime… here is the official press release:
LEGOLAND® DISCOVERY CENTRE MELBOURNE OPENED ITS DOORS TODAY
THE SOUTHERN HEMISPHERE’S FIRST ULTIMATE INDOOR LEGO® PLAYGROUND OPENED TODAY IN MELBOURNE
The highly anticipated LEGOLAND® Discovery Centre Melbourne officially opened its doors today. A first of its kind in the Southern Hemisphere, the multi-million dollar attraction is filled with more than 2 million LEGO® bricks and 13 family friendly attractions, making it the ultimate indoor LEGO playground.
The centre was officially opened today, when The Hon John Eren MP, Minister for Tourism and Major Events, as well as Creative Crew members Grace, Ruby and Tyler, conducted final checks of the centre before the general public came flooding in to join the LEGO fun.
LEGOLAND Discovery Centre Melbourne General Manager Drew Grove is thrilled that the much anticipated centre is ready six weeks ahead of schedule and is now open for LEGO fans to enjoy: “We’re so excited to have officially opened our doors to the first LEGOLAND Discovery Centre in the Southern Hemisphere and now the real fun begins. This Australian-first LEGOLAND Discovery Centre taps into the LEGO vision of fostering creativity through play, and will offer everything from rides and 4D movies to education programs for schools to encourage free play in the minds of kids,” he said.
The Melbourne attraction is the 18th of its kind worldwide and gives LEGO fans a truly bricktastic experience, with a LEGO Factory Tour, MINILAND Melbourne, with more than 1.5 million bricks, three exclusive LEGO-themed movies in the 4D cinema, and two rides; Kingdom Quest and Merlin’s Apprentice. There is fun for all ages with the LEGO City Soft Play Area as well as educational programs at the Creative Workshop, which fosters creativity and assists children with constructing their own bricktastic creations.
John Jakobson, Chief New Openings Officer, of Merlin Entertainment has seen the success of LEGOLAND Discovery Centres around the world and is excited to launch the first Australian centre in Melbourne: “LEGOLAND Discovery Centre Melbourne is an exciting, innovative attraction we’re thrilled to bring to Australian shores and add to our portfolio of family entertainment. After the global success of LEGOLAND Discovery Centres we are proud to offer this incredible attraction to deliver memorable and rewarding experiences to local and international visitors in the most liveable city in the world,” he said.
The centre is located in Australia’s leading shopping centre, Chadstone – The Fashion Capital which has more than 20 million visitors annually. The joint owners of Chadstone, Vicinity Centres CEO and Managing Director Angus McNaughton, is thrilled to welcome Melburnians and visitors from around the world into the attraction: “The Southern Hemisphere’s first LEGOLAND Discovery Centre will see Chadstone continue to lead the way in Australia with an unprecedented entertainment experience and reinforcing our position as Australia’s number one destination for shopping, dining and entertainment,” he said.
LEGO loving families can head to LEGOLANDDiscoveryCentre.com.au to secure their admission into the LEGOLAND Discovery Centre,
● Individual Admission tickets $32.50, and annual passes $81.00
● Trading hours vary from 9.30am – 7pm
#LEGOLANDDiscoveryCentreMelb #LEGO
Any questions? Feel free to ask below, and I will endeavour to find out the answers.
I walked on in, the lights shone bright
The buckets hung on walls of white.
Inside were parts of every type
But was the trip really worth the hype?
I picked up a cup, and scanned the wall.
What should I take, I want it all.
Over one hundred different parts
Just where does one begin to start?
The choice is hard, my brain went wild.
So hard to calm the inner child.
I looked for tiles: that was my dream,
First I found the white ice cream.
Regular bricks: red, pink and blue
I left them be, but what about you?
Left wing, Right Wing in Light Stone Grey.
Some jets complete it: what more to say?
Turntable bases caught my eye
I stacked them up, two hundred high.
How to use them? To decorate
a wall to make my next MOC great.
The garden, too, could stand to gain
Some bamboo and flowers if its all the same.
Clips and bars: grey and yellow
And those small flames, well hello!
So many parts in green of sand:
plates, clips, curved slopes all come to hand.
And telescopes, what about those?
I could use them to make an amusing nose
I stack my cups with bricks so bright:
Yellow and pink, a sherbet fright.
And then trans clear – slopes and bricks
When stacking up became quite thick.
But careful as you scoop parts up,
for if they fail to reach your cup,
Before too long they reach the floor,
and to step on them is sore.
Someone said, I don’t know who,
“It’s best to wear a safety shoe”
Its good advice, from someone kind
to give an adult piece of mind.
Another plan then sprang to mind,
with another project close behind.
As I filled the cup with different bits,
I knew my wallet would feel the hit
of expenses incurred with each cup,
as I moved along to fill them up.
One Large, One Small – enough today
But in the future: who can say?
The range was good, selection fun,
but I wonder if I jumped the gun?
A better plan to go and shop
for parts but to know just when to stop.
I’ll come again in three months time,
when the pieces change – that will be fine.
An autumn day, sky full of sun
made this LEGO store a bit of fun!
The retail store located at the new LEGOLAND Discovery Centre Melbourne opened its doors this week, ahead of the of the Official Ribbon Cutting Next Week.
If you have seen a LEGO Store before, you probably know what to expect.
If not: there are LEGO sets at retail prices (10% off for annual pass holders), small exclusive sets, lots of gear and books that you will not normally see conveniently located all in one location.
And a Pick-A-Brick Wall. I have seen Pick a Brick walls before. I have even selected bricks from them previously. Even though this one is operated by Merlin, PAB at the LEGOLAND Discovery Centre Melbourne is charged by the cupful ($14.99 small; $29.99 Large), rather than weight (Hooray!) But it’s a little different when you have a little time, in your own city and go to visit it for the first time….it didn’t quite drive me to song.
You do not need a ticket to the Discovery Centre to enter the store.
Except on dedicated AFOL nights, adults must be accompanied by a child. This is an international policy in LEGOLAND Discovery Centres. It is a play centre, after all…
I’d like to tell you story. Like all good stories, it is possibly a little long winded, and feels a little irrelevant until you get to the point. This may or may not be a good story. I’d be curious to know your opinion. But bear with me. It was Christmas Day, 1978. A Monday. I was 9 years old. We were staying in Ballarat ( regional Victoria) with my Aunt for Christmas. As I mentioned, I was nine.:Christmas was exciting, even more so at five in the morning when you wake up with an exciting new form of seasonal insomnia. Monday morning at five o’clock is not a time that comes naturally to me these days, but on Christmas day as a child, it represented a definite sleep in!
Our personal family record occurred in 1977, when my brother and I got up at 3:40am on Christmas day, ten minutes after our parents had gone to bed. He proudly went in to excitedly inform our visiting relatives that he had been given a bicycle, and it was all red! Oddly enough, our relatives did not share his enthusiasm at this time. The story however is presented on a semi annual basis to this day. But I digress.
The labelling on my box was a little less French!But back to 1978. I had asked for a LEGO Technical set. I don’t recall being particularly fussed about which one. When I woke up early, I selected a box, and gave it a rattle. It wasn’t an especially big box, but it was all I was allowed to open before a civilised waking hour. This set was number 872: Two Gear Blocks. I had no idea what this set was intended to do. And I had to wait until a civilised hour before Dad would explain that it was to slow down the rate of rotation of a motor. This upset me a little, as the only motors I had belonged to a train set that I had received a year or two earlier. I cannot recall if it was the above Christmas, or another occasion.
So, I was encouraged me to open another package. ( I suspect other members of the family had opened some presents by this stage.)
This one was a similarly sized box, that did not seem to rattle as much as the previous one. This set had only twenty-two pieces, and was #870 – the 4.5V Technical Motor.
After assembling that battery box and connecting the wire, I was a little taken aback: this motor seemed to be spinning at a rate that rivalled even a dentist’s drill. The role of the gear blocks became apparent. Finally, I got to the Big Box. It rattled in a most mysterious way. Tearing off the wrapping paper revealed the 852 Helicopter set. The box had a flip top lid, revealing all of the parts sorted into their own compartments. The set contained a mere three hundred and sixty four pieces. As for the instructions: this was the first set where I remember using an instruction book rather than a single sheet. The 16 page manual included both the Helicopter and alternative Airplane build, as well as inspiration for installing the motor. The helicopter featured a massive 20 instruction steps. This was the greatest LEGO Challenge I had ever faced. [Editors note: The link back there will take you to a scan of the manual at Peeron.com. This is a great resource for sourcing the instructions for LEGO® sets released prior to 2000- after which the majority of instructions appear on the customer support section of LEGO.com]
One of the best things about going away for a Family Christmas meant there was plenty of time for discussion, menu planning, basting, food preparation, cups of tea, cooking, pudding completion, meat roasting, and gravy making by parents, aunts, uncles, grandparents and extended family. By the time Christmas Lunch was ready, it was close to four o’clock in the afternoon. But I didn’t mind. I had completed the Helicopter. I enjoyed spinning the rotors with side mounted steering wheel. And the blades had variable pitch, with the aid a a lever in the cockpit. I don’t think I even noticed that Lunch was running a bit late.
Who needs Christmas Dinner, when you can build a brand new LEGO® Technical Helicopter and demonstrate the maximum rotor pitch. Thank’s Dad for taking this picture, thanks to my daughter for unearthing it while visiting her Grandparents!By the end of the Christmas holiday, I had built the ‘B’ Model – a monoplane, with a propellor that spun as you pushed it along the ground, rebuilt and motorised the A model, and finally put together an unstoppable, motorised shunting vehicle that attempted to clear Granny’s finest china from the dining room table. After this I was invited to do some reading… Certainly I was hooked with building using my Technical Sets, which were undoubtably very ‘system brick’ oriented in its style.
Why am I telling you this?
The instruction book from 8860: Image Source – Brickset.comWhile I was delighted to receive the helicopter, the most coveted set that year was in fact the Technical Flagship Set: The 863 Car Chassis. With over 600 pieces, rack and pinion steering and a front mounted engine, this was the pinnacle of LEGO sets in this era. I never received that set and I am thankful for this. It was at least another 18 months before I received my next Technical set. That set was 8860: Another Car Chassis, with a rear mounted flat four engine, all the previous bells and whistles, a variable slip differential, a two speed gearbox and rear wheel suspension. This set was, by all accounts a great improvement over the previous version. I performed the standard 10 year old builder’s modification of increasing the gearbox to accommodate a third gear, and developing an understanding as to why the designers had decided not to include it in the first place!
This set remained in the LEGO Catalogue up until 1987. An epic eight year run!. The next Technic Car Chassis did not appear until 1998’s 900 piece epic: 8865: Test Car. Over the years, these sets have evolved: losing the brick and plate construction that was par for the course at this time, to a beam and panel construction style. I am still coming to terms with the new vocabulary for working with these pieces. In 2016 we saw the release of the Technic Porsche 911 with 2704 pieces and a price tag to match.
40th Anniversary 8860 with the Modern Parts Palette
With 2017 representing the 40th year of LEGO Technic, a celebration of the 8860 is underway. Using components from 42057 (Ultralight Helicopter); 42061 (Telehandler) and 42063 (BMW R 12 GS Adventure), you can revisit 8860, using contemporary Technic construction techniques. The construction style is quite different to that of the 1980’s – and the final model looks as if it will be a little smaller than the original 8860, but I took the first step back towards visiting Technic sets this week.
42057 Ultralight Helicopter
The Ultralight Helicopter is a small, inexpensive Technic kit, with 200 pieces – around two thirds of the original helicopter I received all those years ago. It took around an hour to build. As an ultralight, the top rotors spin and drive the thrusting rotor, and the 2 cylinders in the engine move up and down as they do so. The pitch of the blades do not change, but there is a lever that allows you to turn the rudder.
For me, this is a good introduction to the current crop of Technic Elements, which have certainly evolved since I last gave them a serious look (35 years ago) and includes a 40th anniversary Technic beam: it was reasonably simple and leaves me looking forward to investigating the Telehandler and BMW R 1200 Adventure Motor Cycle. I just need to find a good way to get them cheaply. In reality, I consider $AUD 170 a little expensive for the sake of nostalgia. I found the Ultralight Helicopter for $AUD22 (RRP $AUD29.99). In the current season of Easter/ School Holiday Toy Sales, I suspect I can get a better deal. I also think completing the project may take a little time. In the mean time…
There is no doubt that adding lighting to a LEGO model will enhance it’s appearance – it adds a degree of life to it, enhancing lines, lightening shadows and highlighting features which may otherwise be a little obscure. LEGO have offered lighting for at least 50 years, originally in the form of a light brick, with the options of a filter, and more recently with power functions, providing a pair of LED lights. We now also see self-contained light bricks in recent sets.
While earlier LEGO® sets used standard filament bulbs, more recently builders have been able to look to Light Emitting Diodes (LEDs) to provide versatile lighting solutions. Recently, LEGO builders have been incorporating lighting into their builds more often than ever before.
The systems used vary from simple ‘bulb and battery’ solutions, through to custom solutions for individual LEGO Sets. There are also sophisticated, microprocessor controlled solutions available, providing preprogrammed sequential lighting patterns. Miniaturisation of LEDs means that they are now able to be incorporated in LEGO builds, with minimal rebuilding required for wiring.
Today, I would like to present a couple of simple options for cheap and easy lighting solutions, that can enhance your models. In the future, I will present some examples of other, more sophisticated lighting solutions. Continue reading →
This morning, it was announced that LEGO® Ideas will no longer be accepting submissions based on third party licenses that are active in the LEGO® Group’s portfolio. These include Star Wars, Marvel and DC Super Heroes, Disney Princesses, BMW
, Bugatti and many more, including licenses from previous Ideas sets and LEGO® Dimensions. The full list of current licences can be found here. If the licences retired, it becomes open for use, unless it was active through LEGO Ideas.
Existing submissions, based on these licences will be retained at this point. There have been a number of other, less significant changes to the Guidelines, as well as the Terms and Conditions. Further information can be found in the latest Ideas blog post.
This will be disappointing for those who night be developing submissions based on these licences, however it should help return Ideas to its original goal: to foster fan driven LEGO sets.
What do you think? is this a positive change for Ideas? Or do you think it unnecessarily restricts options for submission? Leave your comments blow.
There I was, browsing through my LEGO Life newsfeed, and the announcement leapt out at me: The LEGO® Batman™ Movie App, now available for download. So I visited my App Store of choice and tracked it down. It had the right price: this App is free, with no claim of in-app purchases. But what would the cost be?
The opening splash screen give you some options for where to start. You can choose to watch videos, read about the Lego sets, play the game,customize your vehicle or purchase upgrades in return for studs that you collect around the game..
Let us start with the game…
The game starts of interestingly enough: Select your character: Batman or BatGirl with the promise of many others to unlock as you gain the universal unit of LEGO®game currency: the stud. And run. Just run. Dodge, jump over, or slide under obstacles. Occasionally, you may gain the use of a vehicle – initially the standard Batmobile from the movie, but able to be customised – and crash through barricades.
After the unveiling of the BMW Motorrad ‘Hover Bike’ concept model at LEGO World last month, LEGO Rebrick are running a competition for Technic Motorcycle fans: Build to the Future. Using primarily Technic Elements, build the BMW motorcycle of the future – 50 – 100 years from now. Submit your entry on Rebrick by May 5th.
There will be one grand prize and nine runners up. The grand prize winner who will receive: Continue reading →
As you may have picked up over the hundred or so blog posts, I am more of a system kind of a guy: Bricks, studs, 3.18mm bar and clip, mini figures, creator, friends, elves, superheroes, video games are my normal thing.
I have never really been invested in the constraction (constructible action figures) figures: Bionicle passed me by, Super Heroes happened in the background, Hero Factory came and went, and then Bionicle came and went again. And in the meantime, Star Wars characters started to get a go at it too.
I never bought into the mythology of Bionicles and Hero Factory. I have admired some remarkable creations put together with these elements, but I have never actually picked up a set until now. My curiosity was piqued a few weeks ago when I put together the Creator Mighty Dinosaurs and first encountered the ‘ball cup with rubber, high friction.’
Last year, I looked at the styles of Batman head, hidden under the cowl. At the time, the majority of figures relied on the headband to provide the ‘bat eyes’. Last year’s Mighty Micro Batman, however, was sporting some nifty shades with his black balaclava!
Quick revision of previous styles of Batman head pieces
This year’s Batman figures have focused on the LEGO® Batman Movie: variations on the second figure on the left above.
While they have had their own range of expression, they are just white lines on the black head band kind of minifig head: not even really of the type for a tennis headband.
I picked up a copy of DC Superheroes Mighty Micros: Batman vs Killer Moth 76069, to see how things had changed for the caped crusader since last year. He is now in a small helicopter, and light stone grey.
Last year we chuckled at the DC Mighty Micro Batman’s head. This year we have seen a variation in dark blue. Continue reading →
But careful as you scoop parts up,
So, I was encouraged me to open another package. ( I suspect other members of the family had opened some presents by this stage.)
This morning, it was announced that LEGO® Ideas will no longer be accepting submissions based on third party licenses that are active in the LEGO® Group’s portfolio. These include Star Wars, Marvel and DC Super Heroes, Disney Princesses, BMW
As you may have picked up over the hundred or so blog posts, I am more of a system kind of a guy: Bricks, studs, 3.18mm bar and clip, mini figures, creator, friends, elves, superheroes, video games are my normal thing.
